DMC 20x0 - USB/RS232 motion controller - 1 to 8 axes

  • Manufactured by: Galil Motion Control

Quick Overview

The DMC-2000 stand-alone motion controller is a member of the Optima Series, Galil's latest generation of multi-axis motion controllers. The DMC-2000 is the first motion controller in the market designed for the high-speed, flexible Universal Serial Bus (USB)-which is projected as the industry standard for local network communications betwee..

Contact us

Description

The DMC-2000 stand-alone motion controller is a member of the Optima Series, Galil's latest generation of multi-axis motion controllers. The DMC-2000 is the first motion controller in the market designed for the high-speed, flexible Universal Serial Bus (USB)-which is projected as the industry standard for local network communications between PCs and peripherals. The controller is packaged in a compact, rugged enclosure and contains an internal power supply for direct connection to 90-250 V AC. The DMC-2000 controllers accommodate 1- through 8-axis formats and allow control of step or servo motors on any combination of axes. Any mode of motion can be programmed including linear and circular interpolation, contouring, electronic gearing and ecam. Programming the DMC-2000 is simplified with two-letter, intuitive commands and a full set of software tools such as WSDK for servo tuning and analysis, ActiveX Tool Kit for Visual Basic users and a C-Programmers Tool Kit.

 

Features
 

  • Provides USB 12 Mb/s expansion hub with two ports and two RS232/422 ports up to 115kb.
  • Accepts up to 12 MHz encoder frequencies for servos and 3 MHz for steppers
  • Advanced PID compensation with Velocity and Acceleration feedforward, integration limits, notch filter and low-pass filter. Sample times to 62.5 microseconds per axis
  • Modes of motion include jogging, point-to-point positioning, contouring, linear and circular interpolation, electronic gearing and ECAM
  • Multitasking for concurrent execution of up to eight application programs
  • Non-volatile memory for application programs, variables and arrays
  • Dual encoders, home input and forward and reverse limits accepted for every axis
  • 8 Uncommitted inputs and 8 outputs for 1- through 4-axes models, 16 inputs and 16 outputs for 5- through 8-axis models
  • 8 uncomitted analog inputs
  • 64 configurable I/O
  • High speed position latch and output compare
  • Sinusoidal commutation for brushless servo motors
  • High-density shielded cables and optical isolation for noise immunity. CE certified.
  • 12.1" x 2.2" x 6.3" metal enclosure; Accepts 90-250V AC
  • Custom hardware and firmware options available
  • Ceramic Motor Option allows precise control for all Ceramic Motors.


Datasheet (PDF file - 0.29 Meg)

Ask a question about the DMC 20x0 - USB/RS232 motion controller - 1 to 8 axes





Manufacturer Informations

Galil Motion Control
Manufacturer Website

    With over 750,000 controllers sold, Galil is a leading manufacturer of motion controllers and PLCs.
    Since introduction of the first microprocessor-based motion controller in 1983, Galil has remained one of the industry’s leading innovators. Located in Rocklin, California, Galil is a privately held company

    Other products