3-axis Hydraulic Manipulator, - Right-Hand & Left-Hand

  • Manufactured by: Siskiyou

Quick Overview

The MX6600 hydraulic micromanipulator is the integrated version of the MX1600 series manual crossed roller bearing manipulator. This design integrates the metal bellows system with our precis..

Description

The MX6600 hydraulic micromanipulator is the integrated version of the MX1600 series manual crossed roller bearing manipulator. This design integrates the metal bellows system with our precision crossed roller stage to ensure precision movement and long life. The fine positioning dials on three axes use our ultrafine 127TPI adjustment screws to enable 0.5 μm resolution. The coarse positioning knobs on four axes incorpo­rate 20TPI screw drive positioning for smooth motion in the X, Y, Z, and probe axes. The probe axis can be adjusted to the desired angle of ap­proach from 0° to 180°.

 

Product Features


3-axis Hydraulic Manipulator, Right-Hand
Water-based hydraulic system
Less than 2 μm drift / hour
Ideal for intracellular recording
Holds mounting rods from 3- to 10-mm in diameter.

 

Performance Specifications
Travel / axis  
Total: 0.80 inch [20 mm]
Fine: 0.2 inch [5 mm]
 
Minimum controllable motion  
Coarse: 10 μm
Fine: 0.5 μm

Ask a question about the 3-axis Hydraulic Manipulator, - Right-Hand & Left-Hand





Manufacturer Informations

Siskiyou

    Siskiyou provides a diverse range of micromanipulators, microscope sample positioners, motion control systems and modular opto-mechanical building blocks to Life Science and Photonics researchers.


    Siskiyou catalogue
    Siskiyou Catalogue
    (PDF - 73 Meg)
    Other products