Gantry System G-LSQ Series

  • Manufactured by: Zaber Technologies

Quick Overview

Zaber's G-LSQ series gantry systems are based on the robust and fast T-LSQ series linear stages. These systems offer a complete turn-key solution including 2 T-MCA controllers, power supplies, and all the accessories needed to operate the system. They are available pre-assembled on a custom breadboard, or as separate components, ready to be ..

Description

Zaber's G-LSQ series gantry systems are based on the robust and fast T-LSQ series linear stages. These systems offer a complete turn-key solution including 2 T-MCA controllers, power supplies, and all the accessories needed to operate the system. They are available pre-assembled on a custom breadboard, or as separate components, ready to be integrated into your own setup. The G-LSQ series gantries are designed for multi-axis applications where heavier loads require additional support or where access is required to the area under the system. A coupled leadscrew design provides high stiffness for quick and precise response. These gantries will support loads up to 18 kg and can move at speeds up to 330 mm/s.

 

G-LSQ Series Gantry System

  • 150, 300 or 450 mm travel per axis

  • Versatile - up to 330 mm/s speed or 100N thrust depending on leadscrew choice

  • Customizable – add another Zaber stage for a Z-axis

 

Specification Value  Alternate Unit
Microstep Size (Default Resolution) 1.984375 µm  
Microstep Size (Finest Resolution) 0.992188 µm   
Accuracy +/- 100 µm +/- 0.003937 "
Repeatability < 4 µm < 0.000157 "
Backlash < 80 µm < 0.003150 "
Minimum Speed 0.0186 mm/s 0.00073 "/s
Speed Resolution 0.0186 mm/s 0.00073 "/s
Maximum Speed 330 mm/s 12.992 "/s
Peak Thrust 10 N 2.2 lb
Maximum Continuous Thrust 10 N 2.2 lb
Maximum Centered Load 180 N 40.4 lb
Maximum Cantilever Load 200 N-cm 283.2 oz-in
Guide Type Roller Bearing  
Stage Parallelism < 100 µm < 0.003937 "
Vertical Runout < 50 µm < 0.001969 "
Maximum Current Draw 1200 mA  
Linear Motion Per Motor Rev 25.4 mm 1.000 "
Motor Steps Per Rev 200  
Motor Type 2 phase NEMA 17  
Motor Rated Current 1200 mA/phase  
Motor Winding Resistance 3.3 ohms/phase  
Motor Rated Power 9.6 Watts  
Motor Connection Minidin 8 male    
Integrated Controller No  
Recommended Controller T-MCA included (2)  
Mechanical Drive System Precision leadscrew  
Limit or Home Sensing Magnetic home sensor  
Axes of Motion 2  
Mounting Interface M6 threaded holes and 8-32 threaded holes  
Operating Temperature Range 0° to 50° C  
RoHS Status Compliant

 

CE Compliant

Compliant

 

 


 

Comparison - G-LSQ Series    
Part Number Travel Range Weight
G-LSQ150D150D 150 x 150 mm ( 5.906 ") 10.41 kg
G-LSQ300D300D 300 x 300 mm ( 11.811 ") 17.50 kg
G-LSQ450D450D 450 x 450 mm ( 17.717 ") 25.61 kg

Ask a question about the Gantry System G-LSQ Series





Manufacturer Informations

Zaber Technologies

    Zaber was founded in 1997, when precision linear actuators all used DC motors with gearboxes and encoders requiring bulky controllers.
    Zaber resolved this by integrating the motor, controller, driver, and mechanics into a single device with a small form factor.


    Zaber catalogue
    Zaber Catalogue
    (PDF - 4.1Meg)
    Other products