The PRONTO-250-PLUS features 2 additional measurement modes: in Continuous Power (CWP) mode, the device measures power continuously up 8 W while in Single Shot Energy Mode (SSE), it measures the energy of individual pulses.
The PRONTO-250 Portable Laser Probes from Gentec-EO are pocket-size power and energy meters with built-in display. The PRONTO-250 give accurate measurement of laser power up to 250 W in only 5 seconds. In addition to the regular Single Shot Power (SSP) mode.
The high power surface absorber sensors are designed to be used at high average power densities. PRONTO detectors can be supplied with an optional stand and/or power supply
This mid to high power handheld probe is so compact it fits in your pocket!
The touch screen color LCD allows for a friendly user interface. You can make a measurement with just the touch of a button!
You can set the wavelength, brightness and screen orientation to adapt to your application.
Save your data to the internal memory and then transfer it to your PC over the USB connection.
FROM LOW TO HIGH POWERS
Thanks to a low noise level and high damage threshold, the PRONTO can measure powers from 1 W to 250 W.
The PRONTO-250 comes fully calibrated: every wavelength between 248 nm and 2.5 μm (YAG), and a real calibration at 10.6 μm (CO2). The PRONTO-250-PLUS has all these calibrations and is also calibrated for energy measurements.
Place it on a flat surface or use one of the 2 threaded holes that we have integrated in the casing for safe use with optical stands.